description：
DETAILED DESCRIPTION
• Powder dusts, fine chips or any contaminant may affect the accuracy of tool taper on a conventional tool pocket. However, dust adhering can be reduced by around 80%
when using tool pockets in this series.
• Standardized wiring and the use of connector-type sensor switch make it easy to maintain or replace motion sensors.
• Completely waterproof design with separate tool seats, easy to change to different tool specifications.
• Sanjet chooses cam that employs roller cam for tool change with maximum smoothness and stability.
MAGAZINE SPECIFICATION | 30# | 40# | 50# |
|---|
| TOOL SPECIFICATIONS | BT(BBT)/CAT/DIN/ISO/HSK |
|---|
TOOL LOADING CAPACITY | 16/20/24/30/32 | 16/20/24/30/32 | 16/24 |
|---|
| MAX. TOOL LENGTH | 250mm | 350mm | 400mm |
|---|
MAX.TOOL FULL DIAMETER FULL TOOL | Ø70mm(16T) / Ø55mm(20T) / Ø60mm(24T) / Ø60mm(30T) / Ø55mm(32T) | Ø85mm(16T) / Ø95mm(20T) /
Ø80mm(24T) / Ø75mm(30T) /
Ø75mm(32T) | Ø120mm |
|---|
| MAX. TOOL WEIGHT | 3kg | 8kg | 16kg |
|---|
| TOOL CHANGE TIME | 1sec/50HZ ; 0.84sec/60HZ | 1.6sec/50HZ ; 1.3sec/60HZ | 3.6sec/50HZ ; 3sec/60HZ |
|---|
| TOOL SELECTION | Shortest route tool selection |
|---|
| TOOL CHANGE TIME | 0.7sec/50HZ ; 0.6sec/60HZ | 0.9sec/50HZ ; 0.7sec/60HZ | 1sec/50HZ ; 0.9sec/60HZ |
|---|
| MAGAZINE MOTOR | Standard motor |
|---|
| DRIVE | AC 3Ø 220V / 380V |
|---|
AIR SOURCE PRESSURE | 4-8kg/cm² |
|---|
SANJET INTERNATIONAL CO., LTD.
Tel : 886-4-25653819
Fax : 886-4-25653821
E-mail : sjatcms@sanjet.com.tw
Website : https://www.sanjet.com.tw
#Taiwan Tool Magazine # CNC tool changer supplier #Auto tool change
